Someone has suggested that my tappets in my Ford Orion need replacing? Is this an expensive process if taken into a garage?
|
You don't state which engine it is but I guess CVH with hydraulic tappets. The parts will cost a fair bit but what makes you think they need replacement? Rattle at start up is fairly normal. Might be improved with oil change and use of correct oil.
|
get engine red hot then add a good engine flush, read instructions on bottle, should do the trick
|
get engine red hot then add a good engine flush, read instructions on bottle, should do the trick
Err...that's if you're going to change the oil immediately after this!
|
|