could you help me, i have a friends vauxhall corsa 1.2 trip that is leaking water from the heater matrix. so to replace....
i have taken the gearbox shroud, passenger shelf, and loosended the screws that hold the matrix with 4 screws. i can now see the heater.....
what else do i have to undo to get the matrix out? do i have to take all the dash out? im stuck and cant seem to move at the moment. cant see what else to remove to get the heater out....at the moment i can move the plastic to see the matrix but not move it enough to gain access or loosen the clips under the bonnet to remove...
Vinny
|
if you take the hoses off under the bonnet it should now fall out
|
i cant move the plastic that is surrounding the matrix?? i have disconnected the hoses earlier but cant get the matrix out. i cant see that removing the bottom of the dash will make a diffrence?
SQ
Edited by Dynamic Dave on 04/07/2009 at 03:45
|
i found that under the front of the plastic tray that is under the matrix there is a hex head screw accessed by the drivers footwell looking under. when this was removed i was able to move the plastic. undoo the clips and pull out the matrix. now i have to replace....5mins job
|
|