Hello all, [ 2.0L 16v ecotec- auto 1994 ]
found oil in my spark plug holes the other day, car was running a little sluggish. I believe it's the cam cover gasket gone, so I'm about to replace it. I've got the gasket, sealant rings for the bolt-holes & blue sealant.
Can anyone advise me where exactly the sealant goes please? A link to a known diagram would be brill.
Obviously I've done some searching, but can't really find a lot.
Hoping to do it tomorrow, if weather stays ok.
{{ Also, any advice on the best way to clean out the crankcase breather. Seems to be bolted on behind the exhaust manifold, so I don't think I can remove it. I think this maybe was why the gasket went }}
Many thanks,
Pete
|
Can anyone advise me where exactly the sealant goes please? A link to a known diagram would be brill.
No diagram, but a pretty good write up.
www.vauxhallownersnetwork.co.uk/showthread.php?t=6...0
|
Thanks for that,
managed to find a few posts too. I'd been searching via the very top search bar ' site search ' , instead of forum search.
Pete
|
|