Ive been quoted £90 to get a drivers side wheel bearing replaced, is this an acceptable price??
|
Not a bad price.Although you don`t mention front or rear.The rover wheel bearing rear that is.Is around £60 to £70 each to buy yourself.I think that is not bad
|
sorry, its front drivers side, seemed a bit steep to me but going on that info maybe not
|
2000 Clio rear bearing done last month - £35 part + £35 labour.
|
Front wheel bearing on J-reg escort cost me £55 (part £18) a month or two ago. I felt that was a bit expensive! I suppose it depends where abouts in the country you are and where you take it.
Rich
|
Cost me £80 for one on a Xantia TD earlier this year. That was half the price the main dealer wanted. Given that you have to remove the hub, then press out and in the new bearing, you're looking at about 2 hours labour, plus the cost of the bearing (£25 seems about right). Unless you have the means to get the hub nut undone (they're very tight) split the bottom ball joint, and then press in and out the new bearing, this is a garage job.
RichardW
Is it illogical? It must be Citroen....
|
|