can anyone tell me the torque wrench settings for a 205 xs 1400c engine. your help would be greatly appreciated, since i cann't find the manual 4 the car no where on my island.
|
As there are many bolts associated with an engine, I assume you are refering to the torque settings for the cylinder head?
|
i would like it for the: Cylinder head
connecting rod (to crankshaft)
main bearings.
help needed in this area.
|
I presume you have a TU series engine in your XS.(not the early canted over type)
Cylinder head: lbf ft
Stage 1 ..............15
Stage 2...............Tighten by a further 240 deg.
Big end bearing cap...28
Main bearing cap casting
main bearing bolts
Stage 1.............. 15
Stage 2 ............. Tighten a further 45 deg.
Main bearing cap .....6
casting to block
hope this helps
Steve
|
|