Bottle jack oil refill

Honest John Back Room » Technical matters
View Threaded
Sat 5 Aug 2017 15:55
Bottle jack oil refill - gramar

I have a 1 ½ ton bottle jack that’s been in the garage for 30 years and seen limited use. I found it again yesterday and it still works (not tried under load) and it dawned on me that I have never once changed the oil. There is a diagram on the box which shows a removable rubber plug to allow oil replenishment on the jack body.

Should I change the oil and if so what grade of oil does it need.

Reply | Report as offensive | Link
Sat 5 Aug 2017 16:23
Bottle jack oil refill - Galaxy

I topped-up the oil on my hydraulic trolley jack some years ago.

I bought this:

www.halfords.com/workshop-tools/garage-workshop/tr...l

I'm sure there are many other similar products around which would do the same job.

As far as I'm aware you only need to top the oil up on a jack. However, should you wish to change it, assuming you can get the existing oil out, I can't see that would be a problem.

Personally I wouldn't bother - I'd just top it up!

Reply | Report as offensive | Link
Tue 8 Aug 2017 17:41
Bottle jack oil refill - gramar
Thanks Galaxy. I buy some soon and just top up.

Edited by gramar on 08/08/2017 at 17:41

Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide