How do I get the hub off my 2001 Ford Focus to change the wheel bearing?

I recently bought a 2001 1.4 Ford Focus. I was told the near side rear wheel bearing was shot. I've tried to get the hub off, but it seems to be welded on there. Any ideas?

Asked on 28 July 2010 by mac1

Answered by Alan Ross

Who was the person who said that the wheel bearing was shot? If he/she knows what the problem is, can they not tell you how to get the hub off? The wheel hub is normally held on by a large nut that has either a split pin or a tab washer as a securing device. Once this is removed the nut should come off and the hub can be removed. When replacing the wheel bearing, remember that when replacing the large nut it should be set so that the bearing runs freely (not too tight and not too loose).

Tags: bearing wheels and tyres technical issues

Similar questions

Should my Renault Megane's wheel bearings need replacing at 28,000 miles?

My Renault Megane Dynamique has done 28,000 miles and one rear wheel bearing has had to be replaced, as the other does now. Is this normal?

Droning noise - not from bearings, possibly from gearbox?

My car started making a droning noise at speeds of 40mph+. There is no noise when turning left - it begins with the wheels straight and increases with right turns. There is a very slight vibration through...

How do I replace my Ford Fiesta's wheel bearing?

I have a Ford Fiesta 1.3 1998 Encore. My rear wheel bearing has gone on the left-hand side, so I've gone to remove it but there is a casing over the nut for the hub so I'm not able to. Does anyone know...