What has caused my Mercedes-Benz A180 to develop three faulty brake light switches?
Two days after buying a new Mercedes-Benz A180 in 2010, messages came up on the dash saying "ESP & runflat indicator not operative". The Mercedes garage said the brake light switch was faulty and replaced it. Some time later the same messages intermittently appeared but disappeared when the engine was turned off, and did not reappear when it was switched on. About six weeks ago I contacted the garage, who fitted another brake light switch and again told me the brake light switch was faulty. This weekend the same messages appeared yet again. It would be highly unlikely, although possible, that all three brake light switches were faulty. Do you think that there is an underlying fault in the electrical system or the on board computer?
Asked on 20 July 2013 by AO, Orpington
Answered by
Honest John
Brake light switches are often the bearers of false messages on German cars and on some can lead to power being cut just when you need it. But in this case I wonder if the connection between the brake light switch and the ECU is interfering with the can bus electrics.
Similar questions
I am having an issue with my brake lights. The just do not work as of yesterday. All the other lights in the rear cluster do work except the brake lights including the central brake lights at the top of...
My Volvo S80 has about 114,000 miles on the clock. Recently the cruise control started dropping out for no apparent reason. The "Cruise" indicator light comes on and stays on whenever the system is turned...
The other day I found that all three of my brake lights have stopped working. I've done the usual checks - fuse, bulbs. No other lights are affected - the indicators, reverse, fog and side lights all work....
Related models
.jpg?width=115&height=75&rmode=crop)
Much better execution of original A-Class concept. Feels far higher quality, especially inside. Easy to park.
.jpg)
