1999 Citroen Xsara1.9 TDi - Blower fan wiring - Twist

Does anyone know which wires to join to wire the blower back in?

I have a replacement fan from a breakers but it doesn't have the plug attached just a black wire and a white wire. I have found a plug under the gove box which has 4 wires which I assume that it joins to, but which wires go to which?

Any help would be appreciated

Thanks

1999 Citroen Xsara1.9 TDi - Blower fan wiring - Peter.N.

Are you sure the replacement fan doesn't have a plug attached to the wires? If it doesent I would suggest that its the wrong fan.

1999 Citroen Xsara1.9 TDi - Blower fan wiring - Twist

Hi

Thanks for the response, I am in Spain and the breakers here just cut the wires!! It was from the the same year same model.

I think I could probably get it to work by joining wires if I knew what went where.

1999 Citroen Xsara1.9 TDi - Blower fan wiring - Peter.N.

If your original one has four wires that would suggest you have climate control or at least aircon, the extra wires control the fan speed by means of an internal transistor regulator in the motor assembly. You could remove this from your old unit and fit it to the replacement but that could be where the fault lies. If its the same as the Xantia units the regulator is usually the cause of the problem.