Peugeot 307 sw 2.0 hdi 110 Hp 2002 - Anti pollution and limp mode

Honest John Back Room » Technical matters
View Threaded
Wed 29 Jun 2011 09:10
Peugeot 307 sw 2.0 hdi 110 Hp 2002 - Anti pollution and limp mode - pearcey999
Can anyone please help several months ago the unblock diesel filter warning came on followed by anti pollution fault resulting in the car going into 3000 rpm limp mode. I have checked that there is fuel additive still in its tank and also removed the particulate filter and checked it's condition which was quite clean I also have a reciept for this being changed 10000 miles ago. The strange thing is if I unplug the maf meter it still says anti pollution fault but no unblock diesel filter and also does not go into limp. I have had the fault codes read with a Bosch scanner at a local garage and this gave particulate filter as fault but I am reculctant to replace it as I don't think this is the problem due to it's condition, age and the fact that it works fine with the maf meter disconnected. Please help as I am pulling out my hair with this one and I want to change the car.
Reply | Report as offensive | Link
Wed 29 Jun 2011 11:30
Peugeot 307 sw 2.0 hdi 110 Hp 2002 - Anti pollution and limp mode - Collos25

I have had this twice with a 407 1.6hdi first time it was the eoly tank filler cap faulty and the second time was the the MAF which was replaced.

I would comment that to access the ECU program properly peugeot software called PLANET is the only thing that will interegrate the car correctly,it is even a different program for citroens although mechanically they are identical.

Reply | Report as offensive | Link
Wed 29 Jun 2011 22:07
Peugeot 307 sw 2.0 hdi 110 Hp 2002 - Anti pollution and limp mode - HyundaiOwnersClubAdmin

Get the fault codes and place them on here ASAP..

Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide