Latest News
Last updated 2-11-2009. See below for full BIS rules.
Road Tests
The 2006 Hyundai Santa Fe 2.2 diesel auto was always a good 4x4. Especially good to drive quickly on rough tracks.
Hi
Can anyone tell me where the brake load sensing valve linkage is located as it has failed the MOT on it.
Thanks
Roy
Last edited by: Pugugly on Sat 7 Nov 09 at 16:37
It is located on the rear axle beam.Probably failed mot on broken or missing return spring.This part cannot be bought seperately from dealer,but I am sure an alternative could be found.hth
or its just seized,Regards TB
it will need unseizing very very carefully or the bracket will break
they were a fortune for the earlier corsa so takes your times on it
Report Website Problem
Thankyou!
Your issue has been sent to our webmaster
Please give details of the issues you are experiencing below.