Trailer wheels. Obtaining some info about them?

Honest John Back Room » Motoring discussion
View Threaded
Fri 31 Jul 2009 21:54
Trailer wheels. Obtaining some info about them? - redtop
I have two adaptd wheels fitted to my trailer based on sherpa or freight rover. Anybody know where I can get info relating to wheels ie what will replace them if I cannot get the correct ones. They are 5 stud, 5" pitch circle diameter, thanks.

Edited by Dynamic Dave on 31/07/2009 at 22:11

Reply | Report as offensive | Link
Fri 31 Jul 2009 22:28
Trailer wheels. Obtaining some info about them? - bathtub tom
I was in the same position recently, but couldn't find any convenient 'look-up' table. The best I could find was this:

I just had to trawl through it until I found the info I wanted.

Edited by bathtub tom {p} on 31/07/2009 at 22:32

Reply | Report as offensive | Link
Fri 31 Jul 2009 22:40
Trailer wheels. Obtaining some info about them? - bathtub tom
Sorry!

The link I posted was too long and the mods only get eggy if you do that ;>)

I tried to tiny-url it, but that doesn't seem to be working. I'll try again later.
Reply | Report as offensive | Link
Fri 31 Jul 2009 22:46
Trailer wheels. Obtaining some info about them? - Manatee
This might start you off - 5" =127mm, indicated for Rover SD1, 2600, 2500, and Cherokee/Grand Cherokee 99 on.

www.carlsalter.com/wheel_fitments.html
Reply | Report as offensive | Link
Fri 31 Jul 2009 23:08
Trailer wheels. Obtaining some info about them? - bathtub tom
Manatee.

That's so much better than what I was trying to post. I won't bother!

I've bookmarked it. ;>)
Reply | Report as offensive | Link
Sun 2 Aug 2009 12:53
Trailer wheels. Obtaining some info about them? - redtop
Thanks Manatee, usfull sight, should be able to sort something out
Reply | Report as offensive | Link