i have a running fault with a Peugeot expert 2.0 hdi. it starts and runs with 298 bar at the fuel rail-not fluctuating when idling. it will sit idling all day but when u switch off it runs on for 5 secs. when you try and drive it just cuts out but will start up and stay idling. i've replaced rail pressure sensor, in tank fuel pump and also fitted a re=con high pressure pump. checked all the wiring. keep getting fault code p1138. after replacing the hp pump it did run ok for about 4 hours. any ideas? i am stumped now.
Shouting silenced in the subject line - moved over to Tech.
Edited by Pugugly on 08/12/2008 at 18:37
|
hi have you had any luck with this fault and have replaced same as you also injectors and cam and crank sensors, think its pointing to ecu now but im hoping not as it means a new ecu , bsi unit and key chip, im getting a different code to you though p0230 though have same symptons. mines a 406 2.0 hdi 90 rhy
any ideas verry apriceated
thanks danny
|
|
|
