2002 2.0 MAF sensor help - colin882
hi i got a 52 reg 2.0 110 hdi and it started missing and not reving above 2200rpm so i unpluged the MAF sensor and away she went again, so i went and brought a new sensor and plug'd it started up and it started missing and not rev again. Anyone got any help or advice? thanks

Edited by Dynamic Dave on 28/10/2008 at 21:18

2002 2.0 MAF sensor help - Screwloose

Did you have the engine light on or any warning messages?

Is this an RHZ engine or a RHS? [It's in the VIN number.]
2002 2.0 MAF sensor help - colin882
its the RHS engine no the light didnt come on, just had a hunch and unplug'd and away it rev'd again.
2002 2.0 MAF sensor help - Screwloose

Unplugging the MAF should have put the light on? It would also cause limp-home mode and use a default air-flow reading, which may be better than the actual one was if the FAP has blocked.

How many miles has it done and has the additive or FAP been changed?
2002 2.0 MAF sensor help - colin882
its done 57,000 i know the additive has been changed, and think the fap has but not 100% sure.

so what your saying is the light wont come on if the fap is blocked with the MAF unpluged? is that right?

thanks for all your help screwloose your a genius!!!
2002 2.0 MAF sensor help - Screwloose

Not on this one I'm not.... I'm struggling to get a handle on this.

Maybe a code-read and an examination of the live-data is the way to go.
2002 2.0 MAF sensor help - colin882
oh well most of the time u are!! lol

i'll try get it onto a code reader tomorrow then, and in the mean time drive round with the MAF unpluged!