|
Brake warning light on panel stays on permanently;plenty of fluid-brakes work well-new float switch fitted-hand brake switch checked & light stays on when hand-brake switch disconnected.Any ideas?? I can only think wire is earthing somewhere.
|
|
has your front brake pads got wear level sensors fitted?
|
|
No;nor ABS-as I say,I can only think of a short in one of the wires-my next idea is to isolate(cut) each of the wires in turn to trace which one.Power supply comes from ignition thro' warning light to float switch on master cylinder.The other side of the float switch is connected to earth and a further wire goes from float switch supply to the h/brake switch and earths when h/brake is on.
|
|
|
