My track control arm rubber bushes need replacing on the 206, they are the same type as used on the Escorts. The arms were replaced some 12/15mths ago and the ball joints are OK.
Any techniques in getting the rubber bushes out for renewal.????
Thanks
|
Not worth bothering with rubbers on these.
Sling another set of arms on, much easier & quicker, parts are cheap as well.
206 & 307 are well known for knocking the front wishbone bushes out.
Lowering ( a lot of 206s are ) & attacking speed bumps is the main cause.
Also the ball joint isnt part of the arm, its part of the hub ( PSA like to be different )
|
|
|
