Pug 306 Fog Lamp

Honest John Back Room » Technical matters
View Threaded
Tue 25 Jan 2005 13:07
Pug 306 Fog Lamp - Simon (Anne\'s Other Half)
My 99V 306 has its front fog lamp dangling in a boss-eyed manner by the bottom mounting screw. The top screw has either dropped out or been removed by the previous keeper. I cannot get my hand behind the bumper to line the upper plastic bracket up with the screw hole. The possibility of getting a socket set or screwdriver behind there seems impossible.
Is taking the bumper off the only way of sorting this?
If it is, is it an easy /1 person job?

Thanks
Simon
Reply | Report as offensive | Link
Tue 25 Jan 2005 14:23
Pug 306 Fog Lamp - chriswales
Hi,

I have a 98R 306 with the older D style fog lights, but the access should be the same.

I removed the splash guards from the wheel arch and under the bumper, a few of the screws had those funny trox type heads on them. Once the plastic had been removed I was able to get at the rear of the fog lamp.

Cheers
Chris
Reply | Report as offensive | Link
Tue 25 Jan 2005 15:51
Pug 306 Fog Lamp - Simon (Anne\'s Other Half)
Thanks Chris, I'll have a go at the weekend.

Simon
Reply | Report as offensive | Link