Need to get the brake carrier off to change rear discs (Mk2 Gti). Will an 8mm allen key do the trick/it is actually a 7mm/will I need a socket drive because a key isn\'t up to it?
Thanks in advance
Rob Fleming
|
From memory doing mine last year, they were tight! Even using a socket set 1/2" drive hex driver.
Also you will need to make up a tool to screw the pistons back in. I used a bolt (forget size) with a couple of nuts locked together on it, so it could be driven from a standard socket set. It is still in the toolbox suitably tagged.
pmh (was peter)
|
|