xprog to V5.48 - Update xprog to V5.48

Honest John Back Room » Technical matters
View Threaded
Sat 16 Aug 2014 03:04
xprog to V5.48 - Update xprog to V5.48 - gwee

Use your own risk!!



Hi!

Finally its made, atmega update to version 5.48


Not tested by me, but many says its OK. Use your own risk!!

Take backup before reprogramming.

How: Reprogram atmega. Then installing software 5.48. Then in software, update. END.

Software was too big(forum limits), i removed it.


EDIT: Few members got Error "Unknow command.Software error" How know why....?

EDIT2: I added picture, how to connect another xprog for programming. Also need change fuse bits and lock bits. Pictures later. But those files maybe are bad. Need test more....

EDIT3: Now should working. Lock bits, Put the LB1 and LB2 false, else like in picture.

EDIT4: Still there is something wrong. Not work 100% yet!!!!

EDIT5:Files removed. Not solution yet found

Reply | Report as offensive | Link
Sat 16 Aug 2014 03:09
xprog to V5.48 - Update xprog to V5.48 - Stanton23

good tested source for 5.4.8 without dongle, realy working good,tested on MAC too,if have a problem, i always contact supplier and he helps,
http://www.obd365.com/wholesale/atmega64-repair-chip-update-xprog-m-programmer-from-v50-v53-v545-to-v548-full-authorization.html

he has same but cheaper on ebay.

Edited by Stanton23 on 16/08/2014 at 03:11

Reply | Report as offensive | Link