Hi, hope someone out there can help me! I have recently bought a rover 416i P reg and it has no handbook. I need to to know what type of oil it uses and what the tyre pressures should be (and any other useful information I should probably know)!
Thanks Kat
|
Hi, hope someone out there can help me! I have recently bought a rover 416i P reg and it has no handbook. I need to to know what type of oil it uses and what the tyre pressures should be (and any other useful information I should probably know)!
10W40 Oil.
--
These are my own opinions, and not necessarily those of all Toads.
|
many many thanks for your help - I would hated to have become a damsel in distress! :-) Kat
|
Or a helpless female? :-)
It's probably worth getting hold of a manual form the dealer (it will have a part number and shouldn't be too expensive) or try a few breakers' yards.
|
Get the Haynes!!!!
--
These are my own opinions, and not necessarily those of all Toads.
|
|
Oh, one more thing... what's the mileage, and when was the cam belt last changed? I don't know the interval but it's typically 70-80k, and usually worth doing a bit sooner.
It's a fairly difficult job, although the part is cheap - but if it fails it usually takes out the whole engine with it. Beyond 80k, the question is not if, but when it will fail.
This applies to any car with a belt (i.e., most), not just the Rover, but a couple of hundred quid now will save you a fortune later on.
|
30 psi all round
10w/40 oil
MG-Rover Problems? forums.mg-rover.org
|
|
|
|
|
I AGREE WITH THE TOAD 10W40 IS IDEAL - WELL I USE IT IN MY 416 GTI ANYWAY!!!!!
|
|