How do I reset the window ECU on a Peugeot 807?

I have just fitted a replacement window in the rear sliding door of my 2006 Peugeot 807. Now the window does go right to top but then comes down again about four inches. I can get it to the top by "inching it up " with the button, but have been told that the ECU needs resetting so it can learn where top and bottom of its travel is. Can you help?

Asked on 18 August 2014 by loobyralph

Answered by Alan Ross

You could try this

1. Switch the Ignition on.
2.Hold the window button until the window reaches the top and then hold for another 5 seconds.
3.press button to send window down ,when fully down ,again hold for 5 seconds.
Repeat this operation several times,then switch off ignition.
4.Switch ignition on and see if the system is now okay.
Regards

Tags: electrical faults technical issues

Similar questions

What causes my Vauxhall Zafira to blow a fuse?

My 2011 Vauxhall Zafira keeps blowing a fuse. The engine cuts out when the fuse blows and the starter motor won't turn over to restart the engine until a new fuse is put in. It has been getting worse over...

Why are my Audi TT's windows opening on their own?

I have a 2008 Audi TT and have an intermittent problem where both of the windows roll down when the vehicle is parked. I have had it in with my garage on a few occasions but no fault comes up on their...

Why don't the electrics in my car work?

I bought a 2004 Ford Fiesta, but the air con, radio, 12v socket and heater electrics don't work. Is there something that may be preventing them from working as they're close together in the car?

Related models